Fix Mac Error 100060 on (micro) SD Cards/Hard Drives and Transfer Files with Ease

Hello there! We’ve noticed that some Mac users are experiencing an error code 100060 and it’s causing them a bit of trouble. We understand how frustrating this can be, especially when you’re unsure of what’s causing it and how to fix it. So, we’re here to offer some helpful tips and insights to make things easier for you. In this post, we’ll explain what error code 100060 is, what causes it, and provide some effective solutions to resolve it. So, buckle up and let’s get started!

What Is Error Code 100060 on Mac?

Mac error code 100060 can be a real bummer when you’re trying to transfer files from your Mac to an external device like an SD card, micro SD card, NAS drive, or external hard drive. Even copying files between Finder and the SMB network volumes or sharing files between a Mac and PC via WiFi can trigger this pesky error.

Common Causes of Error Code 100060 on Mac

Your Mac often juggles many tasks at once, which means that error code 100060 could be caused by a variety of issues. But based on what other Mac users have reported, it’s likely that one of these things is to blame:

🦠 A virus or some sneaky malware has infected your Mac.
📁 Your disk drive is too full to handle the file transfer.
🗑️ You’ve got too much trash and useless files cluttering up your hard drive.
🗑️ You might have accidentally uninstalled a necessary file.

These are just some common culprits, but there could be other things going on too. The good news is that with a little troubleshooting, you can usually figure out the root of the problem and fix it in no time.

So Now, Let’s talk about the solutions to fix this Error Code 100060 on Your Mac Device For Good!

How To Fix Error Code 100060 on Mac?

Try the solutions given below to get rid of the dreaded “The action can’t be completed because an unexpected error occurred (error code 100060)” on your Mac.

Solution 1: Clean Up Your Mac

Installing programs on your Mac involves specific files necessary for their proper functioning. However, if duplicates of these files exist, your Mac may become confused, leading to error codes like 100060. To avoid this, keeping your Mac clean and free from unwanted files is crucial.

Manually searching for duplicate files on your Mac can be time-consuming, and it’s not recommended. The better alternative is to use a trustworthy cleaning program, such as a Mac repair app. With just a few clicks, this software can scan and identify all the unnecessary files, ensuring your Mac stays optimized and error-free. 🧹💻

Solution 2: Transfer a small file first

If you’re struggling with Mac error code 100060 while transferring files, you might want to try transferring a small file or photo first. Many users have reported success with this method before moving on to larger files. If that doesn’t work, you can try splitting up the larger files into smaller segments or compressing them to reduce their size, and then attempt the transfer again. Remember, patience is a virtue when it comes to file transfers!

Solution 3: Use an external USB adapter

According to posts on Apple-related forums, error code 100060 frequently occurs when transferring files to SD or micro SD cards via the built-in SD card slot. However, using a generic external USB-C adapter might just be the workaround you need to bypass the issue. Don’t let an unexpected error rain on your file transfer parade!

Solution 4: Update macOS

If you recently updated to macOS Big Sur and are now experiencing error code 100060, you’re not alone. Fortunately, updating to macOS 12.1 seems to have resolved the issue for some users. To see if an update is available for your Mac, go to System Preferences and then click on Software Update. If an update is available, be sure to install it and keep your Mac up-to-date to prevent similar errors in the future. Happy transferring!

Solution 5: Boot into Safe Mode

If you are struggling with error code 100060 on Mac, try booting into Safe Mode. It’s an effective troubleshooting method that disables third-party applications at startup, cleans the system caches, and examines the boot disk for any errors.

Simply restart your Mac in Safe Mode and try the file transfer again to see if the error persists. If the issue goes away in Safe Mode, try restarting normally and disabling any login items that could be interfering with the transfer.

Solution 6: Disable Antivirus or security applications

In some cases, antivirus or security programs like Norton antivirus can cause issues when transferring files on Mac. They may become incompatible with the updated operating system or enable blocking features like Norton Firewall Vulnerability Blocking or Vulnerability Protection.

If you have Norton 360 installed, it’s possible that the app is not functioning correctly with macOS Big Sur, especially when writing data to NAS drives. You can attempt to update Norton to see if the problem is resolved. If not, it’s recommended that you turn off Norton or any features that could cause file transfer issues on Mac.

Solution 7: Delete com.apple.finder.plist

There is a possibility that error code 100060 is a Finder issue, which can usually get fixed by resetting its preferences. To do it, you need to trash the preference file with the steps below:

1. Open Finder.
2. Click Go > Go to Folder at the top.
3. Enter /Library/Preferences and press Enter.
4. Right-click com.apple.finder.plist and choose “Move to Trash.”
5. Empty the Trash and restart your Mac.

Solution 8: Transfer files via Terminal

If you’re unable to transfer files using Finder, you can turn to Terminal, a built-in command-line utility, to get the job done. This option is especially useful if you encounter error code 100060, as it allows you to copy files from your Mac to an external device without triggering the error.

To copy a single file, launch Terminal from the Applications > Utilities folder and input the following command: cp filepath /Volumes/drivename. Hit Enter to execute the command.

To copy a folder of files, open Terminal and type in the following command: cp -R folderpath /Volumes/drivename. Press Enter to run the command.

Note that you must be in the home directory for the command to work correctly. If you’re not sure of the file or folder’s path, you can easily drag it into Terminal to acquire its path.

Solution 9: Repair your external drive

It’s possible that your external hard drive or SD card is experiencing file system errors, which is why you’re having trouble copying files. Luckily, you can use First Aid to repair the drive and fix the problem. Here’s how:

First off, head to Disk Utility from the Applications > Utilities folder.
From there, select the drive you want to fix on the left-hand side and click “First Aid.”
Be patient and wait for the scan to complete.
If First Aid does report errors it can’t repair, you might have to consider reformatting the drive. But be warned, this will wipe all data on it, so be sure to back up your files first!

Solution 10: Reinstall macOS

If you’ve tried all the fixes mentioned earlier but are still struggling with error code 100060 on your Mac, it’s worth considering switching to a different file manager.

Some users have found that using a third-party file manager can bypass the issue, especially if the error seems to be related to Finder. You can search for a file manager that offers a free trial and see if that works for you.

However, if none of these solutions work, the last resort before declaring a hardware issue is to reinstall macOS. This can be done without erasing the startup disk, so you won’t lose your data. Nevertheless, it’s still a good idea to back up your Mac with Time Machine before starting the reinstallation, in case anything goes wrong. Remember, an ounce of prevention is worth a pound of cure!

Conclusion – 100060 Error Code on Mac

There you have it, folks! When you encounter the pesky 100060 error code on your Mac, there’s no need to panic. Just try out these ten solutions we’ve listed above, and you’ll be well on your way to fixing the issue. Remember to transfer small files first, use an external USB adaptor, update your macOS, and more! And if all else fails, don’t hesitate to reinstall your operating system – just make sure to back up your data first. With these tips, you’ll be able to handle error codes like a pro.

If you’re still struggling, don’t hesitate to contact APPWRK for expert assistance.